Turn Your Garage Floor Into a Finished Space

Decorative flake coating systems for garage and interior concrete floors in Mora, Minnesota

A bare concrete garage floor in Mora collects oil stains, tire marks, and dust that soak into the porous surface and become difficult to clean over time. Flake coating systems cover the concrete with a durable, slip-resistant finish that resists moisture, chemicals, and abrasions while giving the floor a clean, finished appearance. Homeowners in Mora use flake coatings to turn their garage into a space that feels less like unfinished storage and more like a functional part of the home.

Sunderman Concrete installs flake coating systems by first preparing the concrete surface through grinding or shot blasting to open the pores and remove any existing coatings, dirt, or oil. A base coat of epoxy or polyurethane is applied, and colored flakes are broadcast across the wet surface to create texture and pattern. After the base coat cures, a clear topcoat is applied to seal the flakes in place and provide a smooth, durable finish.

If you want to upgrade your garage floor in Mora with a flake coating system, get in touch to discuss color options and receive an estimate.

What the Coating Process Looks Like

Before coating, the garage floor in Mora is ground or shot blasted to create a rough profile that helps the epoxy bond to the concrete. Any cracks or divots are filled, and the surface is cleaned to remove dust and debris. The base coat is then rolled or squeegeed onto the floor, and flakes are scattered by hand or with a broadcast hopper to achieve even coverage.

After the coating cures, you will see a consistent, textured surface with depth and color variation from the flakes. The floor is easy to sweep and mop, and spills wipe up without leaving permanent stains. The slip-resistant texture provides traction even when the floor is wet.

A clear topcoat is applied over the flakes to lock them in place and provide a protective layer that resists chemicals, abrasions, and hot tire pickup. The topcoat also gives the floor a satin or gloss finish depending on the product used. The system is designed to last for years without peeling or chipping as long as the surface preparation was done correctly and the concrete was in good condition before installation.

Questions that come up before coating a garage floor

Homeowners in Mora often ask about durability, surface preparation, and how flake coatings hold up to vehicle traffic and Minnesota winters before committing to the project.

How long does a flake coating last on a garage floor?
A properly installed flake coating can last 10 to 15 years or more in a residential garage, depending on traffic and maintenance. The topcoat protects the flakes and base layer from wear, but recoating the topcoat every few years can extend the life of the system.
What happens if the concrete underneath is cracked?
Cracks should be filled and repaired before the coating is applied, but if the concrete continues to move or shift, the coating may crack along with it. Flake coatings are not structural and will not hold a failing slab together.
How do you clean a flake-coated floor?
You can sweep or vacuum the floor regularly and mop it with a mild cleaner and water when needed. The coating resists stains, so oil, dirt, and other spills wipe up easily without soaking into the surface.
Why is surface preparation important for coatings?
Epoxy and polyurethane coatings bond mechanically to the concrete, meaning they grip the rough surface created by grinding or blasting. Without proper preparation, the coating can peel or delaminate, especially in high-traffic areas or under vehicle tires.
What colors are available for flake coatings?
Flakes come in a wide range of colors, and most systems use a blend of two or more colors to create depth and variation. You can choose neutral tones like gray and tan or bolder combinations with blue, red, or metallic flakes depending on the look you want.

Sunderman Concrete installs flake coating systems for garage and interior floors throughout Mora and nearby areas, providing professional surface preparation and durable finishes that hold up to Minnesota conditions. Reach out to schedule an estimate and review color options for your garage floor.