Replace Concrete That No Longer Functions

Full concrete removal and replacement for driveways, patios, and slabs in Mora, Minnesota

When your driveway or patio in Mora has cracked to the point where water pools in low spots, the surface has crumbled from freeze-thaw damage, or sections have settled unevenly, patching will not fix the underlying problem. Concrete replacement involves removing the failed surface completely, addressing any drainage or base issues that caused the failure, and pouring a new slab that is level, properly reinforced, and built to handle local soil and weather conditions. Homeowners in Mora replace concrete when the old surface no longer drains correctly, looks deteriorated, or creates tripping hazards around the home.

Sunderman Concrete handles the full process, starting with breaking up and removing the old concrete, hauling away the debris, and preparing the base with proper compaction and grading. New forms are set, reinforcement is placed, and the concrete is poured in a single pour when possible to avoid weak joints. The new surface is finished to match your needs, whether that is a smooth trowel finish, broom texture, or decorative stamp.

If you have a driveway, patio, or walkway in Mora that needs full replacement, reach out to discuss the scope of work and get a detailed estimate.

What Removal and Replacement Involves

The old concrete in Mora is broken up using a jackhammer or concrete saw, then lifted out in sections and loaded into a truck for disposal. Once the area is cleared, the base is inspected for soft spots, poor drainage, or erosion that may have contributed to the failure. Additional excavation or grading may be needed to correct these issues before the new pour.

After the new concrete is poured and finished, you will see a flat, level surface with consistent drainage away from your home. The driveway or patio no longer has low spots where water sits, and there are no cracks or broken edges that collect dirt or create uneven transitions.

Replacement also allows you to adjust the slope, thickness, or layout of the slab to better suit your property. If the old slab was too thin or poured without reinforcement, the new one is built to the correct specifications for the load it will carry and the conditions it will face. Proper curing and sealing after installation help the new concrete last longer than the surface it replaced.

Homeowners often ask these before replacing concrete

Homeowners in Mora often ask about cost, timing, and whether replacement is necessary compared to patching or resurfacing the existing concrete.

How do you know when concrete needs full replacement?
If the surface has widespread cracking, sections that have settled or heaved, or drainage problems that cause water to pool, replacement is usually the better option. Patching may work for isolated damage, but it will not fix structural or base issues.
What happens to the old concrete after removal?
The broken concrete is hauled away and typically taken to a recycling facility where it is crushed and reused as aggregate for road base or other construction projects. Disposal is included in most replacement quotes.
How long does concrete replacement take?
Most residential driveways or patios can be removed and replaced within two to three days, depending on the size and access to the site. The new concrete needs several days to cure before you can walk on it and about a week before you can drive on it.
Why does replacement cost more than resurfacing?
Resurfacing only covers the existing surface with a thin layer, while replacement involves removal, disposal, base preparation, and pouring a full-thickness slab. Replacement addresses underlying problems that resurfacing cannot fix, so it lasts longer and provides better results.
What can be done to prevent the new concrete from failing?
Proper base compaction, correct thickness, reinforcement, and adequate drainage are the key factors that prevent premature failure. Sealing the surface after it cures also helps protect it from moisture and freeze-thaw damage over time.

Sunderman Concrete provides full concrete replacement services for residential properties in Mora and nearby communities, addressing drainage, structural, and durability issues with every pour. Contact us to schedule an evaluation and receive a replacement quote for your project.